Sigma 3D3M 90.5cm Tile Cutter

In stock
SKU
3D3M905CM
£504.30

Sigma 3D3M 90.5cm Tile Cutter has been specifically designed to cut a wide range of tiles and is a necessity for most tiling professionals. 

The Sigma 3D3M 90.5cm Tile Cutter is a professional manual tile cutter that has been designed to cut a wide range of tiles up to 20mm thick but, it's better suited for cutting uneven and porcelain tiles, this is due to the spring-loaded vibration dampened breaker which can score thicker tiles or those with relief surfaces with less effort and higher accuracy.

It is a manual tile cutter with tungsten carbide scoring wheels that have ball bearings that provide a smooth operation on the tiles by pressing the shield along the surface of the tile. By moving the breaker handle upwards quickly breaks the tile while the sprung-loaded base plates absorb the impact.

The Sigma 3D3M 90.5cm Tile Cutter has an adjustable measuring bar with a scale to accurately determine the angle of 45 ° in both directions. The measurement bar has two scales to crack the length of the stone from the centre of the cutting line in centimetres or inches to be measured. A quick-change system on the guide rail allows the handle type to be changed to a standard or Klick Klock if required. These extra handles are not supplied with the Sigma 3D3M MAX SERIES tile cutter and must be purchased separately.

This tile cutter has a maximum cut length of 92.5cm and diagonal cuts can be made on tiles measuring up to 64x64cm. The Sigma 3D3M 90.5cm Tile Cutter is a necessity for most tiling professionals. 

Write Your Own Review
You're reviewing:Sigma 3D3M 90.5cm Tile Cutter