Sigma 3B4M 62.5CM Tile Cutter
The Sigma 3B4M 62.5cm Max Tile Cutter has been specifically designed to cut a wide range of tiles and is a necessity for most tiling professionals.
The Sigma 3B4M 62.5cm Max Tile Cutter is a professional manual tile cutter that has been designed to cut a wide range of tiles up to 20mm thick but, it's better suited for cutting uneven and porcelain tiles, this is due to the spring loaded vibration dampened breaker which can score thicker tiles or those with relief surfaces with less effort and higher accuracy.
It is a manual tile cutter with tungsten carbide scoring wheels that scores the tile by pulling the breaker along the surface of the tile. By moving the breaker handle upwards quickly breaks the tile while the sprung-loaded base plates absorb the impact.
The Sigma 3B4M 62.5cm Max Tile Cutter has a swivelling measurement bar that rotates through 45 degrees in both directions with a scale to accurately determine the angle of cut. This measurement bar features two scales to allow the length of tile to be measured from the centre of the cutting line in either centimetres or inches. The tile cutter has a quick-change system on the guide rail that allows the handle type to be changed to a standard or Klick Klock if required. These extra handles are not supplied with the The Sigma 3B4M 62.5cm Max Tile Cutter and must be purchased separately.
This is a manual tile cutter that has a maximum cut length of 62.5cm and diagonal cuts can be made on tiles measuring up to 44.1 x 44.1cm. The Sigma 3B4M 62.5cm Max Tile Cutter has a breaking strength of 1300kg and weighs 10kg and is a necessity for most tiling professionals.